以上为某外资半导体企业采购的洁净电梯合同扫描文件。洁净电梯的具体要求如下：

原文：

Requirement as below,in order to reach the target of the elevator cleaning measure🐠s and the equipment and require for the dust-free environment and f🍃or the equipment needed to maintain pressure are all belong to the range of party supplies.(FFU and filter provided by the elevator manufacturer,factory type requested by the owners )

翻译：

以下所述，为了达成电梯无尘环境所需之洁净措施与设备，与为维持压差所需之设备，皆为乙方供应范围。（FFU及滤材由电梯厂商提供，工厂类型依照业主要求）

i.All is needed to meet the above men💧tioned fr🗹eight elevator,clean staircase requirement。

需要满足以上所述货梯、无尘电梯之规范要求：

ii.🍸clean lift to produce between sereral floors a staircase enclosure clean envionment for personnel and product delivery

无尘电梯用以产生一个梯箱洁净环境用于几个楼层之间人员和产品的运送。

iii.Add filter fan car ,should be sufficient to maintain the circulation of air inside the staircase b✅ox for air,to keep the ladder inside the 1000 le𒁏vel of cleanliness

轿箱顶加设过滤风扇，须足够保持梯箱内的空气流通换气，以维持梯箱内1000等级的清洁度。

iv.Elevator contractor should install concealed ai🎀r return road and filt⛄er in clean lift ladderwall

电梯承包商在无尘电梯梯箱壁 中安装隐蔽式空气回风道及滤网。

v.Mechaincal room or shaft should be assembled exhaust𓆏 equipment,deflate room air result in differential pressure.(Clean package is reponsible for)

机械室或井道应有排气设备,抽出机房空气产生压差环镜(净化工程负责)

vi.The floors,walls,foof,staircase wall and interior materials of mechanical  room sh💃ould bepainted epoxy coating to dustproof(cleansing contractors are responsible for it).

机械室地面、壁面、顶面，梯井壁面与内部材料皆应涂装EPOXY以防尘(洁净承包商负责)。

vii. The stainless steel material is used at back of the lift hall,stainless steel ladder box materia๊l back and lift steell skeleton should be du🍰st-proof and anti-static paint coating,treatment for 304 stainless steel ladder box floor flat-floor(t=3.0mm).

电梯厅不锈钢板材料背面,梯箱不锈钢板材料背面及电梯钢梁骨架应涂ඣ装防尘漆及防静电处理,梯箱地板为304不锈钢平面地板🐷。

洁净电梯轿厢内部

洁净电梯轿顶